Adjustment Range: ±3.0° Camber ±1.5° Caster
Quantity: Each
Caution: Bench grease ball joint prior to installation. When servicing vehicle do not allow the weight of the vehicle to hang on the joint while re-greasing. Grease very slowly with low pressure until grease has worked its way through the joint and purged through the boot. Do not pressurize the ball joint pocket with the grease gun. If there is pressure in the handle of your grease gun STOP. Only use manual grease guns to fill the ball joints. Using a battery or air assist grease gun can cause permanent damage and or premature failure of the ball joint.
Note: When installing ball joint on smaller rim size if installed in all caster or negative camber position my cause rubbing with rim. Always check for proper clearance between all moving parts before moving vehicle. To prevent any damage to vehic
Sides Adjusted: 1
Compatible Vehicles | Years | Total | Thrust | Alignment | Adjustment Method | Est. Install Hours |
---|---|---|---|---|---|---|
Cadillac Escalade | 2007 - 2020 | X | Front Wheel | Control Arm W/BJ |
Control Arm W/BJ0.60 |
0.60|
Chevrolet Tahoe 2WD/4WD | 2007 - 2014 | X | Front Wheel | Control Arm W/BJ |
Control Arm W/BJ0.60 |
0.60|
Chevrolet Tahoe 2WD/4WD | 2015 - 2020 | X | Front Wheel | Control Arm W/BJ |
Control Arm W/BJ0.60 |
0.60|
Chevrolet Avalanche 1500 2WD/4WD | 2007 - 2013 | X | Front Wheel | Caliper Shim |
Control Arm W/BJ0.60 |
0.60|
Chevrolet Silverado 1500 2WD/4WD | 2007 - 2013 | X | Front Wheel | Control Arm W/BJ |
Control Arm W/BJ0.60 |
0.60
Click one of the options
for more information on this part: